|
|
|
|
 more detail Replacement banjo bolt - fits fuel gauge Do you already have some Stromberg banjo fuel fittings and now want to add a fuel pressure gauge? Well here's your answer! This is the BOLT ONLY and gaskets. - 1/8th NPT threaded banjo bolt accepts fuel pressure gauge price: $17.95 |  more detail Banjo fitting - single end. Polished The perfect hot rod banjo fitting. For great proportions, we make them from big diameter stainless steel material with a recess lip on each side to hide the gasket and move the bolt head closer to the banjo. We kept the wrench surfaces short, knocked the corners off the hex and rounded the bolt head too. They're sized to fit both 5/16inch and 3/8inch hose, with plenty of fuel flow guaranteed. - Fully, machine polished stainless steel banjo - Recess lip on each side hides the gasket - Sized to fit both 5/16 inch and 3/8 inch fuel hose - Works perfectly with 9083k - double end version price: $29.95 |
||||||||||
 more detail Banjo fitting - double end. Polished The same as our 9082K-P fully polished single banjos, but with hose on both sides. For perfect proportions, we make them from big diameter stainless steel material with a recess lip on each side to hide the gasket and move the bolt head closer to the banjo. We kept the wrench surfaces short, knocked the corners off the hex and rounded the bolt head too. They're sized to fit both 5/16inch and 3/8inch hose, with plenty of fuel flow guaranteed. - Fully, machine polished stainless steel banjo - Recess lip on each side hides the gasket - Sized to fit both 5/16inch and 3/8 inch fuel hose - Works perfectly with 9082k - single outlet version price: $33.95 |  more detail Stromberg Banjo Spacer The new Stromberg Banjo Fitting Spacer moves the banjo fuel line out one inch from the inlet fitting, providing instant clearance for the long centre lever arm you find on all tripower progressive linkages. The new, media polished, stainless steel banjo spacer uses our proven Stromberg superseat end, with its correct 18 degree seat, into the inlet fitting (original or Stromberg S-jet). The short wrench surfaces are designed so you can secure it properly but it still match the bolt head on the Stromberg banjo. When they?re all tightened up against the banjo, it looks like one solid piece. - Spaces banjo out one inch from fuel inlet - Instant clearance for 3x2 progressive linkage - Proven Stromberg superseat seal into S-jet - Short wrench surfaces match banjo bolt - Fits single and double banjos - Media polished stainless steel price: $11.95 |
||||||||||
 more detail Stromberg SuperSeat Hose Fitting NEW! From Stromberg, the folks who make the new 97 so you know it's good. Here's a 5/16" hose fitting with the correct 18 degree seat. The hex part is kept short for good looks, and so is the thread length - so it works as well with mystery aftermarket inlet fittings as with the Stromberg S-jet. price: $7.95 |  more detail CHROME Stromberg SuperSeat Hose Fitting NEW! Here's the same Stromberg SuperSeat Hose Fitting describe above with beautiful CHROME plating. price: $9.37 |
||||||||||
 Mini Hose Clamp Hose clamp are 100% stainless steel marine grade. These clamps are perfect to use with fuel fittings and fuel line. Size is 7/32" to 5/8" (5.6mm to 16mm) - 5/16" wide. |  more detail Stainless Steel Carburetor Throttle Arm This super nice Stainless Steel throttle arm is 1-7/8" long and an awesome 5/16" thick! Even the set screw is Stainless Steel! Fits a .274 shaft for use on Stromberg, Holley 94 and Edelbrock 94 carbs. Made in USA. price: $8.95 |
||||||||||
 Stromberg Rod End Stromberg rod ends come in right and left hand threads for easy adjustment. Just spin the rod to adjust for the correct lever angles. Stromberg rod ends require 10-32 threaded rod and 9/16th length of thread. |  more detail Stromberg SuperLink throttle arm NEW! The Stromberg SuperLink throttle arm is a totally new, high pressure die-cast zinc part that looks both modern and traditional at the same time. The modern H-beam section provides strength without extra weight, and the small reveal at the bottom edge adds to the period feel. The SuperLink arm works perfectly with the full range of new and original Stromberg carburetors - 97, 40, 48 and 81 and more - and also the Holley 94 with an extended shaft. It can be drilled out to fit oversize (0.281 inch) throttle shafts and to 5/16th inch to fit the popular Rochester 2G carburetors. (Priced Each) price: $10.95 |
||||||||||
|
|||||||||||
